info@jsktraders.com
Current location： Home > Product > Copper > Copper Steel Coil & Strip > C11000 Cu-ETP Copper Coil

Product

C11000 Cu-ETP Copper Coil

C11000 Electrolytic Tough Pitch (ETP) Copper in Sheet / Plate / Coil, Rod & Rectangle (Square Edge). We carry a very large range of sizes and will cut the material to length. C11000 Electrolytic Tough Pitch (ETP) Copper is produced by the direct conversion of selected refined cathodes and castings under carefully controlled conditions to prevent contamination of the pure oxygen-free metal during processing. The method of producing OFHC copper ensures extra high grade of metal with a copper content of 99.99%.

Online consultation

Product Introduction

C11000 Electrolytic Tough Pitch (ETP) Copper in Sheet / Plate / Coil, Rod & Rectangle (Square Edge). We carry a very large range of sizes and will cut the material to length. C11000 Electrolytic Tough Pitch (ETP) Copper is produced by the direct conversion of selected refined cathodes and castings under carefully controlled conditions to prevent contamination of the pure oxygen-free metal during processing. The method of producing OFHC copper ensures extra high grade of metal with a copper content of 99.99%. With so small a content of extraneous elements, the inherent properties of elemental copper are brought forth to a high degree. This is the most common copper. It is universal for electrical applications. ETP has a minimum conductivity rating of 100% IACS and is required to be 99.9% pure. It has 0.02% to 0.04% oxygen content (typical). Most ETP sold today will meet or exceed the 101% IACS specification. As with OF copper, silver (Ag) content is counted as copper (Cu) for purity purposes. 

TYPICAL USES

Some of the typical areas that C11000 is used in, is as follows:

Building Fronts, Gutters, Skylight Frames, Roofing, Flashing, Downspouts, Spouting

Pressure Vessels, Chemical Process Equipment, Chlorine Cells, Chimney Cap Screens, Heat Exchangers, Printing Rolls, Anodes, Rotating Bands, Kettles, Pans, Vats, Road Bed Expansion Plates

CHEMICAL COMPOSITION

(%max., unless shown as range or min.)

Cu(1)

O

Min./Max.

99.90 min

-

Nominal

-

.04

(1) Cu value includes Ag.

Note: This is a high conductivity copper which has, in the annealed condition a minimum concuctivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS.

Note: Oxygen and trace elements may vary depending on the process.

MECHANICAL PROPERTIES

(Measured at room temperature, 68 F (20 C)

Temper

Section

Size

Cold

Work

Typ/

Min

Temp

Tensile

Strength

Yield

Strength

(0.5% ext.

under load)

Yield

Strength

(0.2%

offset)

Yield

Strength

(0.05%

offset)

El

Rockwell

Hardness

Vickens

Hard.

Brinell

Hard.

Shear

Strength

Fatigue

Strength*

Izod

Impact

Strength

in.

%

F

ksi

ksi

ksi

ksi

%

B

C

F

30T

500

500

3000

ksi

ksi

ft-lb

mm.

C

MPa

MPa

MPa

MPa

MPa

MPa

J

Flat Products

H02

0.04

0

TYP

68

42

36

-

-

14

40

-

84

50

-

-

-

26

13

0.0

1

20

290

248

-

-

14

40

-

84

50

-

-

-

179

90

0.0

M20

0.025

0

TYP

68

32

10

-

-

50

-

-

40

-

-

-

-

22

-

0.0

0.64

20

221

69

-

-

50

-

-

40

-

-

-

-

152

-

0.0

Rod

M20

1

0

TYP

68

32

10

-

-

55

-

-

40

-

-

-

-

22

-

0.0

25.4

20

221

69

-

-

55

-

-

40

-

-

-

-

152

-

0.0

Shapes

M30

0.5

0

TYP

68

32

10

-

-

50

-

-

40

-

-

-

-

22

-

0.0

12.7

20

221

69

-

-

50

-

-

40

-

-

-

-

152

-

0.0

M20

0.5

0

TYP

68

32

10

-

-

50

-

-

40

-

-

-

-

22

-

0.0

12.7

20

221

69

-

-

50

-

-

40

-

-

-

-

152

-

0.0

Flat Products

H04

0.04

0

TYP

68

50

45

-

-

6

50

-

90

57

-

-

-

28

-

0.0

1

20

345

310

-

-

6

50

-

90

57

-

-

-

193

-

0.0

Rod

H04

0.25

40

TYP

68

55

50

-

-

10

60

-

94

-

-

-

-

29

-

0.0

6.35

20

379

345

-

-

10

60

-

94

-

-

-


Return

Related PRODUCT